Qilive Q.5582, User Manual

Page: 8 / 106

8
EN
4. BEFORE FIRST USE
■ Remove all packaging materials.
■ Check that the air fryer has no visible damage and no parts are missing.
■ Before using the appliance for the first time, or before using it after a prolonged storage,
clean the appliance and accessories following the instructions in the CLEANING AND CARE
section.
5. PLACEMENT
■ Place the appliance on a level, stable, dry, and heat-resistant surface.
IMPORTANT: Use a heat-resistant mat under the appliance to protect the kitchen countertop or
tabletop from heat damage. Failure to do so may result in a darkening of the countertop or table
finish, staining, or permanent blemishes.
6. OPERATION
■ For best results when air frying, we recommend preheating the air fryer for 3 minutes before
adding food, if the appliance is cold.
■ Always use the airflow tray in the air fryer basket. The tray allows hot air to circulate around
the food and excess fats and oils to drip to the bottom of the basket, preventing them from
collecting under the food.
■ Do not fill the basket to more than ¾ full to ensure consistent cooking and better heat
circulation.
■ When preparing large quantities of food (for example fries, shrimp, chicken drumsticks
or frozen snacks), shake,turn or mix the ingredients in the basket 2 or 3 times for a result
homogeneous.
6.1. USING THE AIR FRYER
1. Insert the air fryer basket into the main unit with the airflow tray inside. Do not use the air
fryer basket without the airflow tray.
2. Plug the appliance into a grounded electrical outlet.
■ The air fryer will enter Standby Mode. The control panel will only display the button to
indicate the air fryer is connected to the power supply.
3. Touch the button to turn the air fryer on.
■ After turning the appliance on, the default temperature and time in Manual Mode are
200 °C and 15 minutes
.
Preheating with Manual Mode
4. To preheat the air fryer, touch the button to display the icon, and then touch the or
button to set 3 minutes on the timer.
5. Touch the button to display the icon, and then touch the or button to set the
temperature according to the recipe (→ PRESET COOKING MODES; AIR FRYING GUIDE).
6. Touch the button to confirm and start preheating.
■ The control panel will display and the flashing icon. The timer and temperature
values will alternate on the screen.
■ At the end of the timer, the air fryer will automatically turn off and beep 5 times.
Filling the air fryer basket
7. After the 3 minutes have elapsed and you hear 5 beeps, pull out the air fryer basket by the
handle and place it on a flat and heat-resistant surface.
8. Put the prepared ingredients on the airflow tray. Do not exceed the “MAX” level marked
inside the air fryer basket to ensure proper cooking and air circulation.
9. If you are preparing two different ingredients at the same time, you can use the divider. Slide
the divider into the two slots in the air fryer basket, with the arrow mark pointing upward, and
fill each side of the basket with the ingredients.
■ Make sure the ingredients require the same cooking settings, and reduce the amount of