QERIDOO Kidgoo Pro, User Manual

Page: 19 / 44

19
You only require the tow bar in trailer mode. The tow bar is being used to
attach the Kidgoo to a bicycle that is equipped with a suitable coupling,
see „Connecting the trailer to a bicycle“ on page 30 .
The tow bar is attached to the tow bar mount using a locking bolt and
can be used in two different positions:
Mounting the tow bar
In both positions the tow bar is additionally secured by the locking button.
»
Towing position: The tow bar is facing forwards.
»
Standby position: The tow bar is facing to the rear and is carried
under the cabin floor.
»
Pull the locking button with one hand and hold it in place.
»
Push the front button on the tow bar with the other hand so that the
locking bolt unlocks.
Tip!
You do not have to remove the tow bar completely. Simply
place the tow bar into the tow bar mount from behind
to stow it under the cabin floor, see „Insert the tow bar“
on page 27 .
Mounting the coupler onto a bicycle
Danger!
Make sure that your bicycle is suitable for towing a bicycle
trailer, see „Performance limits“ on page 06 . As it may
be necessary to replace the rear wheel axle, it is best to
contact your dealer or the bicycle manufacturer.
Caution!
Secure the bicycle to prevent it from toppling over, and
make sure that the rear wheel cannot drop out of the axle
mount after the screw connection has been undone. For
example, use an assembly stand or turn the bike around
so that you can place it on the saddle and handlebars.
»
Keep the button pressed and push the tow bar into the tow bar
holder from the front until the mark.
»
Release the button so that the locking bolt secures the tow bar in
the tow bar mount.
»
Release the locking button so that it jumps back into the closed
position and additionally secures the tow bar.
Locking button
ASSEMBLY