QERIDOO Kidgoo Pro, User Manual

Page: 18 / 44

18
»
Insert the lower part of the pennant pole with the attached centre
piece into the slot on the left leaf suspension cover.
»
Guide the upper part of the pennant pole through the loop on the
left head protector and then insert the pennant pole into the orange
centre piece.
»
Unroll the pennant so that it can fly clearly visible on the pennant
pole.
You need the buggy wheel for the Buggy and Jogger mode. The
buggy wheel is connected to the frame-mounted bracket and can be
rotated by 360°.
Optional assembly steps
Installing the buggy wheel
»
Lift the cabin at the front.
»
Push the buggy wheel all the way into the wheel bracket until it
clicks into place audibly.
»
Check whether there is sufficient air in the buggy wheel (maximum
air pressure: 1.9 bar). If necessary, use an air pump for car valves to
top up with air.
»
Set the desired operating mode with the release button and the
operating mode switch at the front of the wheel suspension:
–
Buggy mode: Buggy wheel rotatable by 360°.
–
Jogger mode: Buggy wheel running straight.
–
Trailer mode: Release and pull out the buggy wheel
Adjusting the buggy wheel
Operating mode
switch
Release button
ASSEMBLY