QERIDOO Kidgoo Pro, User Manual

Page: 16 / 44

16
»
Make sure that the slide rails for the wheel guard are fixed and
tightened on both sides.
»
Slide the wheel guard onto the slide rails as shown in the picture.
»
Be sure that the fixing mechanism locks audibly.
»
Repeat the procedure on the other side of the trailer.
The head protectors serve as additional side protection in case the
trailer should tip over.
Installing the head protectors
»
Be sure that the slide rails for the head protectors are fixed and
tightened on both sides.
»
Slide the head protector onto the slide rail as shown in the picture.
»
Be sure that the fixing mechanism locks audibly.
»
Repeat the procedure on the other side of the trailer.
The push handle has multiple height settings and is used for pushing,
pulling and manoeuvring your Kidgoo. When folded, the push handle
also provides roll over protection.
Mounting the push handle
»
Prepare the push handle by fully unfolding it. To do this, press and hold
the push buttons on both sides, see „Adjusting the push handle“ on
page 25 .
»
Open the two quick-release fasteners on the cabin frame.
»
Insert the bolts of the push handle into the socket on the cabin frame
and close the quick-release fasteners.
Curvature on push button
Caution!
When mounting the push handle, make sure that the
curvature on the push button points upwards (see
picture). Only then can the push handle be adjusted to
all positions.
ASSEMBLY