QERIDOO Kidgoo Pro, User Manual

Page: 14 / 44

14
Below you can read all the information that you will need to assemble
your Kidgoo properly.
»
Make sure that you have sufficient space to
assemble it. Also pay attention to the door
width at the place of installation: The Kidgoo1
is 67 cm wide with the wheel guards fitted and
the Kidgoo2 is 81 cm wide.
»
Have a size 4 hex key at hand.
»
Perform each of the instructions step by step.
»
If necessary, follow the QR code to call up a video about assembly
and operation on the internet.
»
You can find our video tutorials on our YouTube channel at
www.youtube.com/user/Qeridoo
»
Place the collapsed cabin in the assembly area.
»
Position yourself behind the cabin.
»
Pull both sides of the rear cabin frame all the way up.
»
Open the cover of the storage compartment.
»
Pull the rear cross bar back evenly until it engages audibly.
Danger!
Never perform assembly work if there are children in
the cabin. Keep children away from the vehicle during
assembly.
When handling moving components, make sure that your
hands or fingers do not get trapped. Check all screw
and cotter pin connections for secure fit before first
use.
»
Remove the packaging material and all protective caps, and
dispose of them in accordance with the environmental guidelines
that apply in your region.
»
Cut the zip ties at the rear of the cabin
»
Read the chapter „Assembly“ on page 14 before you assemble
parts.
Unpack contents
Unfolding the cabin
Tip!
Since the cover of the cabin is pulled tightly over the frame
of the Kidgoo, it can be more difficult to open it at first,
until the cover has stretched a little. To make unfolding
easier, press with one hand onto the upper frame bar on
the roof of the cabin while you pull the folding mechanism
backwards.
VIDEOTU
TO
RIA
L
ASSEMBLY