31
»
Remove the cotter pin from the tow bar head.
»
Push the tow bar onto the coupler of the bicycle so that the cotter pin
holes in the coupler and tow bar head are one above the other.
»
Insert the cotter pin into the hole and lock the cotter pin fastening.
»
Check that the connection between the coupler and the tow bar is
secure.
»
Guide the tow bar’s retaining strap through the braces of the rear wheel
so that the trailer is securely connected to the bicycle frame.
»
Fix the safety strap using the clamping buckle on the tow bar head. Make
sure that the securing strap is pulled into the belt buckle from below.
Make sure that it cannot flutter into the spokes of the rear wheel while
riding. If necessary, wrap the safety strap several times around the
bicycle frame and fix the end of the strap with the rubber ring on the shaft
of the tow bar.
Danger!
Always make sure the safety strap is in place before using the
product in trailer mode. In addition, make sure that the safety
strap can not get into moving parts of the towing bike.
Danger!
Always secure the tow bar to the bicycle frame with the
retaining strap. This ensures that the trailer will remain
connected even if the tow bar becomes detached from
the coupler.
Irrespective, the coupler must always be properly mounted
and the connection to the tow bar must be secured with
the locked cotter pin. Otherwise the tow bar can be come
detached and can be pushed into the rear wheel’s spokes
during braking.
»
Loosen the safety strap and wrap it around the tow bar. Fix the
safety strap to the tow bar using the clamping buckle.
»
Remove the cotter pin from the coupling and pull the tow bar head
out of the coupling.
»
Reinsert the cotter pin into the coupling head and lock it in place.
»
Stow the tow bar in the ready position as described in the chapter
„Mounting the tow bar“ on page 19
.
Decoupling the trailer
Using the comfort functions
The 3-in-1 canopy is comprised of an insect net, an adjustable sun
screen and a weather canopy:
»
The inner part of the 3-in-1 canopy must be closed during every
journey because the integral insect net provides protection against
insects and small stones.
»
The outer skin of the 3-in-1 canopy is comprised of a durable
transparent sheet and can be rolled up. It provides protection against
splash water and strong winds, and dissipates exhaust gases out of
the cabin.
Opening the weather canopy:
»
Open the zips attached on the sides which connect the weather
canopy to the insect net.
»
Roll up the weather canopy and secure the roll at the top with the
two toggle fasteners.
Adjusting the 3-in-1 canopy
UTILISATION
Summary of Contents for Kidgoo Pro
Page 1: ...1 Kidgoo Pro EN User Manual ...
Page 2: ...Contents ...
Page 42: ...42 Jogger Buggy Jogger Trailer ...
Page 43: ...43 Skater Ski Hike ...