Qeedji SMH300, User Manual

Page: 26 / 80

26
d) Mobile device configuration:
These are the main available actions linked to mobile devices that the SLATE can do on the wake up events explained above:
Send HID key on WPAN2
: allows to transmit the keycode of the key pressed on the SLATE to the mobile phone,
Wait for a delay during WPAN2
2500
ms
: gives the possibility to extend the default SLATE connection duration with the mobile device, which is by
default 2500 ms. It could be needed in case using with some specific Androïd OS or iOS versions. Changing this value must be first allowed by
Qeedji support.
Receive Message overlay over WPAN2
: allows to activate the communication with Mobile application.
e) Temporarily secondary content display on key press:
The
Display a key image instead of standard one, during <n> seconds 10
action needs to be activated for the after
Key
event. It allows to activate
the temporarily secondary content display feature and configure the duration from 1 to 65635 seconds (18 hours).
The required content with the right filename are not provided in the product. The customer has to generate them itself with the provided
img2ppk.exe
tool. Download the
img2ppk.exe
tool from the Qeedji Web site .
Create your .BMP content, or .PNG content, in the 800x600 resolution, with any content editor you have and save them into .BMP or .PNG format.
Execute the
img2ppk.exe
tool on your MS-Windows computer. Select the source content (.BMP or .PNG) and enter the names for the destination file
.PPK:
F1.ppk
,
F2.ppk
,
F3.ppk
,
F4.ppk
,…
For further information, refer to the
img2ppk
application note.
Connect the SLATE to your computer with an USB link and copy the content with the right .ppk filename into the SLATE file system, one appropriate
content name per each key pressed.
f) Interactivity configuration for custom application:
The
Start a timer for <m> s repeated <n> times maximum
11
action needs to be activated for the
key
event. It allows to maintain interactivity with
one user for custom applications by waking up here 3 times within 30 seconds in the default configuration:
Start a timer for <m> s repeated <n> times maximum
: not activated in the default configuration:
<m>
: 30..60
<n>
: 1..9
For further information, contact support@qeedji.tech .
For further information, refer to the
SLATE106 User manual
on the Qeedji Web site .
9
16
17
18
19