Qeedji SMH300, User Manual

Page: 23 / 80

23
SLATEs configuration
As soon as a SLATE is paired to a SMH300 device, it inherits of the configuration file
APPLI.CFG
provided by the SMH300 device.
In the default configuration, the SMH300 device is configured to work with SLATEs in the nominal configuration:
Wake-up policy:
wake up regularly: every quarter of an hour ,
active days: 5/ 7 days ,
active interval: 9 .00 AM - 7 .00 PM .
if the SMH300 has a date & time default value equaling 1st J an 2005 , the active interval is 0.00 AM - 11.59 PM .
Slate Message Overlay
: not activated,
Slate Maintainer
: not activated,
Touch keys
: not activated,
NFC badging
: not activated,
Extend interactivity for custom App: not activated.
So before starting any pairing procedure, check attentively the SMH300 device configuration for the SLATE.
If the nominal configuration is correct, go directly to the chapter §
Pairing procedure .
Else click on
Activate
button.
☛ The nearby SLATEs should appear in the
SLATEs detected
table. Press on the
 Common preferences
button.
Common preferences:
Select the
General
1
tab.
The interface supports several fields to define the SLATE wake up policy, where they are allowed update their content, install a new software release,
or apply a new configuration.
a) Wake up policy:
The
Limit the wake-up to a period of time
fieldset allows to define the timeslot in which the SLATE can wake-up:
Limit the wake-up to a period of time
:
the
Active interval
¹
2
,
All day long ,
From hh1:mm1 to hh2:mm2 ,
the
Active days
²
3
:
Sunday : deactivated by default,
Monday : activated by default,
Tuesday : activated by default,
Wednesday : activated by default,
Thursday : activated by default,
Friday : activated by default,
Saturday : deactivated by default.
The
Wake-up regularly
fieldset, which is always activated, is defining the wake up periodicity (or heartbeat) inside the timeslot defined above:
Each quarter of an hour
4
: the SLATE wakes up every quarters of hour (…, 2.00 PM, 2.15 PM, 2.30 PM, 2.45 PM, 3.0 PM, 3.15 PM, …)
By interval
4
: 15 .. 1440 (minutes).
¹ The
Active interval
must be at least 15 minutes. Outside the
Active interval
, the device is in
sleep
mode, does nothing and can not be woken up
by vibration.
² At least one day must be activated.
⚠
So that the wake up policy is working properly, the SMH300 device needs to be on time.
⚠
Be careful when you are programming a new wake-up policy. Indeed, progamming an unexpected value for the wake-up may configure the
SLATE to only wake-up when there are no people at all at the office !!
1
2
3
4
5
6
7
8