Qeedji SMH300, User Manual

Page: 25 / 80

25
Matrix :
Select the
Matrix 9
tab.
a) Default configuration:
This is the default configuration:
b) Wake up event:
The
Matrix
tab allows to customize the behaviour of the pictureframe application depending on the wake-up events which are:
after the
USB MS
event: wake-up by an USB cable plug,
after the
USB Power
event: wake-up by an USB power tank plug,
after the
Heartbeat
event: wake-up by internal timer,
after the
NFC writer
(RFU) event: wake-up by NFC writing,
after the
NFC tag
event: wake-up by NFC badging,
after the
Key
event: wake-up by key press,
after the
Vibration
event: wake-up by SLATE taping,
after the
Test card
event: wake-up by
Test card
activation,
after the
Timer
event: allows to trig several wake-ups with a defined period.
c) Configuration to communicate with
SMH300
hub:
Send HID key on WPAN1
16
: allows to transmit the keycode of the key pressed on the SLATE to the SMH300 device.
◬
In this case, the following actions must be activated after HID key:
Wait for a delay during WPAN1
2500
ms 17
: giving the possibility to
extend the default SLATE connection duration with the SMH300 device, which is by default 2500 ms, allowing to take benefit of the wake up by
HID key to update its content right now.
F older synchronization over WPAN1 18
: allowing the SLATE to update its content through WPAN1
(mandatory when working with SMH300 device).
Send NFC tag on WPAN1
19
: allows to transmit the NFC tag to the SMH300 device after NFC badging on the SLATE.
◬
In this case, the following actions must be activated after NFC tag:
Wait for a delay during WPAN1
2500
ms 17
: giving the possibility to
extend the default SLATE connection duration with the SMH300 device, which is by default 2500 ms, allowing to take benefit of the wake up by
NFC to update its content right now.
F older synchronization over WPAN1 18
: allowing the SLATE to update its content through WPAN1 (mandatory
when working with SMH300 device).
☛
R eceive M essage overlay over WPAN1
is inactivated by default because it is not supported in this version.
9
10
11