GA5000 Gas Analyzer
OMGA5KN4.6
Page
13
of
73
4.1.4 Landtec Systems Gas Analyzer Manager – LSGAM
Landtec Systems Gas Analyzer Manager (LSGAM) enables the operator to maximize the
operation of the gas analyzer. It enables direct communication with the unit, features a
simple upload and download facility and is fully compatible with the latest Microsoft™
operating systems.
Features:
Organization and transfer of borehole IDs and readings to and from the gas
analyzer.
Configuration of the gas analyzer.
Flexible grouping of the IDs.
Structured organization of transferred data.
Automatic detection of instrument type and available options.
Secure data mode to prevent tampering.
First time set-up wizard.
Enable flow measurements for GA5000 gas analyzers.
4.1.5 GPS (optional)
An optional GPS feature is available for the GA5000 gas analyzer. It enables the site
engineer to automatically locate borehole IDs using GPS satellite signal from predefined
borehole IDs uploaded from Gas Analyzer Manager or set on the analyzer when out in the
field prior to taking a reading. The GPS reading data is stored for each measurement
reading providing an audit trail confirming that a reading was taken.
4.1.6 Bluetooth
The analyzers are fitted with a Bluetooth receiver which enables the operator to
download readings and upload IDs without the need to connect the analyzer to a PC via a
USB cable.
4.1.7 Internal Flow (optional)
The GA5000 gas analyzer has the capability to measure the gas flow from a borehole
without the need for an additional flow pod. The user is automatically prompted to take
this measurement during the normal reading sequence. This function can be selected as
‘On’ or ‘Off’ for each ID using Gas Analyzer Manager. If it is off the user will not be
prompted to measure the flow.
