background image

GA5000 Gas Analyzer

   

OMGA5KN4.6 

 

Page 

23

 of 

73

 

 

6.13.4  Installation of XP Drivers 

 

This requires administrator rights.  

 

 

Locate the folder that contains the downloaded files (noted from before) 

 

Unzip the folder XPRNDIS_drivers.zip  

 

Turn the analyzer on and wait for it to warm up 

 

Press the menu key  

 

Select device settings 

 

Select 3 for ‘device information’ 

 

Change the comms mode to “GA5K” by pressing the comms mode soft key  

 

Connect the analyzer to the PC via the USB Lead 

 

Windows will start the “Found New Hardware Wizard”  

 

Select “No, not at this time” click next 

 

Select “Install from a list or specific location (advanced)” and then click next 

 

Unselect “search removable media (floppy, CD-ROM…)” 

 

Select “Include this location in the search:” 

 

Browse to the location of the XPRNDIS_divers which were previously unzipped and 

click next 

 

Select continue or accept if any notifications appear.  

 

The drivers will now be installed  
 

6.13.5  Installation of Vista and Win 7 drivers  

 

This requires administrator rights. 

 

 

Turn the analyzer on and wait for it to warm up 

 

Press the menu key  

 

Select device settings 

 

Select 3 for ‘device information’ 

 

Change the comms mode to “GA5K” by pressing comms mode soft key  

 

Connect the analyzer to the PC via the USB cable 

 

Follow the onscreen instructions and accept all of the prompts 

 

The drivers will now be installed  

  

 

 

6.13.6  Updating the analyzer  

 
Once all of the above operations are completed the software is fully installed and the 

instrument is ready to be updated. This can be done by a user who does not have 
administration rights on their PC.  
 

 

Ensure the analyzer is fully charged -

 

you do NOT want the analyzer turning off during 

the update process  

 

Turn the analyzer on and wait for it to start-up  

 

Navigate to the main read screen and press the menu key.  

 

Select device settings.  

 

Press 3 for ‘device information’ 

 

Change the comms mode to GA5K by pressing “Comms mode” soft key (

Please

 

note

if you have just installed the drivers the analyzer may be in GA5K mode already) 

 

Connect the analyzer to the PC via the Landtec 5K-USB cable. 

 

Start the Landtec 5K updater software  

 

Press the “Check internet” button  

 

The software will now attempt the download the data files to the PC  

 

This may take several minutes depending on your internet speed 

 

Due to individual company’s firewalls and I.T.’ policies the update cannot always be  

Summary of Contents for GA5000










































































Reviews: