4 |
Components
— Assembly |
Flextrac Series
Components
Cutting Flextrac Series Beam
ASSEMBLY
CARET-LEFT
CARET-LEFT
If you have ordered 3m beams, they will need to be cut into suitable lengths before assembly. Study your drawing
to determine the beam lengths required before cutting.
Saw requirements:
Use miter saw for aluminum profile cutting at a high speed for nice, clean cuts. The saw should have the
ability to cut the largest profile in one single cutting action.
Working site:
You should use a special area for cutting beams in order to keep the assembly area clean.
Quality of cut:
If burrs are evident, they must be removed prior to assembly. Make sure the cut is straight for proper assembly
Safety:
All safety precautions issued by the cutting saw manufacturer should be followed at all times.
The basic Flextrac Series conveyor structure consists of five component groups:
Conveyor beams, Drive Units, Idler Units and Bends
Conveyor Guide
Structure System
Conveyor Accessories
Safety
