q-Tech OLT-QSW-9010, Cli Configuration Manual

Page: 47 / 101

User Manual
5. Multicast service configuration 47
www.qtech.ru
OLT configuration:
The Mandatory configuration:
OLT (config) # igmp enable OLT (config) # igmp mvlan 510
OLT (config) # igmp mvlan 510 group 224.1.1.1
OLT (config) # igmp mvlan 510 source-port xe1 / 2
OLT (config) # igmp mvlan 510 receive-port gpon-onu1 / 4: 3
OLT (config) # igmp interface gpon-onu1 / 4: 3 version 3
Optional configuration:
OLT (config) # igmp gen-query-intvl 200 // general query interval
OLT (config) # igmp last-memb-query-count 3 // the number of
specific query packet
OLT (config) # igmp last-memb-query-intvl 20 // specific query
packet interval
OLT (config) # igmp max-resp-time 300 // maximum response time
(0.1s)
OLT (config) # igmp robustness 3 // robustness parameters
OLT (config) # igmp snooping-aging-time 200 // snooping aging time
OLT (config) # igmp unsolicited-report-interval 2 // active
reporting interval
Note:
Proxy Member Aging Time = robustness * gen-query-intvl + max-resp-time.
When the HGU type is not configured with ONU multicast, it can also add to the multicast group, and the
multicast packet forwarding behavior is controlled by the ONU.
ONU configurations:
OLT (config-gpon-onu1 / 4: 3) # tcont 1 profile T4-200M
OLT (config-gpon-onu1 / 4: 3) # gemport 1 tcont 1
OLT (config-gpon-onu1 / 4: 3) # service-port 1 gemport 1 user-vlan
510 vlan 510
OLT (config-gpon-onu1 / 4: 3) # remote service 1 gem 1 vlan 510
T-CONT Index: 1 Name: T1
T-CONT Profile: 20M
GEM Port Index: 1
Name: gemport1 T-CONT Index: 1
Service Channel Service type: internet GEM Port Index: 1 Priority: 0
VLAN ID: 510
User port VLAN Port: eth_1 / 1
VLAN modes: transparent VLAN ID: 510