q-Tech OLT-QSW-9010, Cli Configuration Manual

Page: 14 / 101

User Manual
1. GPON properties 14
www.qtech.ru
2016-05-31 11:02:40 [gmt +03:00]
OLT# write
OLT# reboot
Are you sure reboot [y/n] y
Unsaved configuration will be lost. Save now? [y/n]
OLT# default configure OLT# reboot
Are you sure reboot [y/n] y
Unsaved configuration will be lost. Save now? [y/n]
n
1.7. System Configuration Operation
1.7.1. Save
This command is used to save the system's current database files and configuration files. Use this
command when the user needs to save the current data or configuration file. When the database file
or configuration file of the system is modified, you can use this command to save it.
Note:
system configuration automatically save time is 1800 seconds, i.e. 30 minutes.
1.7.2. Restart
This command is used to reset the system. If the system fails or the software version needs to be
upgraded, this command is used when the package file and the supporting database file are loaded
and when the system is reset. After successfully resetting the system, the system can resume services
and run the newly loaded programs and database files.
1.7.3. Resotre Default Configuration
This command is used to restore the detault configuration.
1.7.4. System diagnostic information upload
OLT supports the upload function of the system log, saves the LOG information of the system in file
mode, records the file as unos.log, and uploads it to the local computer through TFTP. When the
system fails, you can collect the system's diagnostic information through that command and submit
it to technical support personnel.
Upload Steps:
1. Turn on the TFTP server on your computer and make sure the computer is connected to the
OLT in-band / out-band management port.
2. On the computer using the ping command, you can reach corresponding management IP
address.
3. In the administrator mode, enter the following command, upload the system diagnostic
information to the computer, TFTP specified folder, IP address, you need to specify the
address to connect to the OLT management network card.