MAIN MENU GUIDE
QT518 & QT5116 User Manual
36 |
P a g e
Here users can set motion sensitivity, detection area and alarm out. The following are the definitions of each option:
Enable:
Enable motion detection.
Trigger:
Setup similar with that of sensor alarm, but linked speed domes need to use different channels, i.e. if users
enable motion detection on camera 1, the linked speed domes must be cameras 2-16.
Area:
Set sensitivity and motion detection area. DVR supports multiple detection areas as shown in Fig 4-12
Detection Area Configuration. Click the blocks or drag mouse to enable or disable. Red means unavailable,
transparent means available. Click Save to save and exit.
Fig 4.12: Detection Area Configuration
Sensitivity:
Set detection sensitivity from 1-8, 8 is most sensitive. The default is 4.
Exit:
Quit without saving
Hold Time (S):
The interval time between two consecutive motion events, similar to that of sensor alarm.