12
13
CHAPTER 3
VIDEO CAPTURE CARD HARDW
ARE AND CONNECTIONS
VIDEO CAPTURE CARD
HARDWARE AND CONNECTIONS
3.1 QSDT4PCRC CARD HARDWARE
PICTURE 3-2
PICTURE 3-1
Audio In Ports
Spot Out Port
Alarm Port
Video In Dongle
CHAPTER 3
SPOT OUT
The Spot Out feature allows you to send selected video channels to a separate monitor.
Menus and controls will not display in this monitor. If you do not wish to use this feature then
you do not have to attach this port.
Call
Monitor
Out
Spot Out with Multiple Cards
In situations where multiple cards are
installed, only one card can provide the signal
to the remote monitor.
Link the con2 to con1 ports on the cards,
with the last card linking to the Spot Out port
on the face plate.
PICTURE 3-3
PICTURE 3-4
PICTURE 3-5
AUDIO
You will only need to install the Audio dongle if you have audio-equipped cameras,
microphones or other audio input devices.
PIN1 AUDIO-1
PIN2
GND
PIN3 AUDIO-2
PIN4
GND
PIN5 AUDIO-3
PIN6
GND
PIN7 AUDIO-4
PIN8
GND
Use of this dongle will take up an additional
I/O port on the computer.
The audio connector’s pins are mapped out
in
Picture 3-4
.
VIDEO
The video dongle connects to the 15-pin
receiver on the card. The four video inputs
use BNC connectors to interface with the
camera leads.
1
2
3
4
5
6
7
8
J5
GiL-G-8P-S3T2-E
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
Video
Video
Video
Video
Not Used
Not Used
Not Used
Not Used
Ground