IMAge 61
IMAge 62
Cruise setup
To configure the AUTO CRUISE function, open the CRUISE SETUP screen (
IMAge 62
) by
clicking on the CRUISE SET button on the PTZ Setup menu (
IMAge 61
).
Set:
To set a stop point for the PTZ camera,
1.
Select the PTZ camera from the channel drop down menu
2.
Enter the bit quantity into the TOTAL field. (Get the bit quantity from the control board
on the PTZ camera
3.
Set the cruise points by entering the number into the CUR POINT field. The system’s
default current cruise point (starting point) is 01. (Make your first cruise point, which is
the first stop on the cruise number 01, make the second stop 02, etc)
4.
Enter the pause time for each stop in the STOP TIME field (This is the amount of time
you want the camera to stop at this point before going to the next stop point.)
5.
Set the camera’s position by clicking the SET button and move the camera to the
desired position by using the arrows. Select the SET button again to save this
position.
6.
To removes changes made to the settings, select CLEAN
7.
Click the SAVE button for the set up to save the cruise settings.
GOTO:
Select the GOTO button to access specific pre-selected points
Note: this DVR model supports up to 100 pre-set points but the PTZ camera may be limited to different
number of pre-set points.