[ Figure 7-2 : Initial Indication Screen on Power On ]
[ Figure 7-3 : Update Screen ]
[ Figure 7-1 : LCD Location ]
[ Table 7-1 : LED Indications ]
7.1 LED Indications
As shown in the [Figure 7-1], the LED of Q.HOME+ESS HYB-G2 is located at bottom of LCD.
The color of LED depend on current status of INVERTER and LED display information can be
checked in [Table 7-1].
7.2 Starting the System
After completing the installation, turn on the AC circuit breaker installed in the distribution box
and then turn on the DC disconnect switch on the product.
Check the system check message on the front LCD screen.
7.2.1 Loading Screen & Update Screen
The [Figure 7-2] is displayed at the time of initial boot, and the home screen is displayed when
internal communication is normal. The time setting is automatically renewed when connected
to the network. The [Figure 7-3] is a screen display when ESS Software (PMS & PCS) is updated.
7. Message Description
Energy is not being generated.
Energy is being generated.
Fault
OFF
Green
Red
Battery is in stop mode.
Battery is in charging
or discharging.
Fault
Grid is not connected.
Grid is connected.
Fault
Solar (A)
Battery (B)
Grid (C)
Message Description
I
28
A
B
C
Summary of Contents for Q.HOME+ESS HYB-G2
Page 2: ......