DVR User’s Manual
20
3.4.3
Network Time Protocol Setup
Time Zone
Select <
Time Zone
> to setup the time zone. To find out the correct local time
zone, please visit
www.greenwichmeantime.com
or refer to below figure.
NOTE:
The <
Time Zone
> must be set to the correct local time zone or
the <
Network Time Protocol Setup
> will not be accessible.
Network Time Protocol Setup
After setup the time zone, <
Network Time Protocol Setup
> will be
accessible. Select <
NTP Server
> to setup the time server. The default time
server is time.nist.gov, but the users can change to any other time server if
preferred. A list of IP addresses of the time servers is listed below.
129.6.15.28
129.6.15.29
132.163.4.101
132.163.4.102
132.163.4.103
128.138.140.44
192.43.244.18
131.107.1.10
69.25.96.13
206.246.118.250
208.184.49.9
64.125.78.85
207.200.81.113
64.236.96.53
68.216.79.113
After the time server is set, set <
Manually Time Sync
> to <Yes> to sync the
time. The time sync can also be updated periodically. Set <
Automatically
Time Sync
> to <On>, and the time will be automatically synced once an
hour.
