DVR User’s Manual
48
4.5.5
Set Preset Points
The DVR allows users to set preset positions. The amount of preset points
depends on the dome manufacturer.
Follow the steps to set preset points.
Press a Channel key to view the corresponding camera in full-screen.
Then press DOME to enter Dome Control mode. The dome control panel
will be displayed.
Use Direction keys to pan/tilt the dome camera to desired position.
Click <Preset> on the dome control panel or press CH1 key to access the
Set/Go Preset function. A numeral keyboard will be displayed as below.
1
2
3
BS
4
5
6
Set Preset
7
8
9
Go Preset
Exit
0
Clear
Run Tour
Input a desired preset number.
Click on the <Set Preset> button to save the position. Now the preset
position is set and ready to be called.
4.5.6
Call Preset Points
Follow the steps to call preset points.
Press a Channel key to view the corresponding camera in full-screen.
Then press DOME to enter Dome Control mode. The dome control panel
will be displayed.
Click <Preset> on the dome control panel or press CH1 key to access the
Set/Go Preset function. A numeral keyboard will be displayed.
Input a desired preset number.
Click on the <Go Preset> button to call the preset point. Then the selected
dome camera will rotate to the preset position automatically.
