DVR User’s Manual
23
3.5.4
Per Camera Configuration
This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below
(Record Mode: 720*240@240PPS in NTSC / 720*288@200PPS in PAL).
Per Camera Config
Cameral Select
Normal PPS
Normal Size
Event Max PPS
Event Size
Event Active
Day
15
Mid
30
Best
Both
Night
15
Mid
30
Best
Both
CH01
Weekend
15
Mid
30
Best
Both
Firstly, select a Camera for setting its record configuration. The image and
recording settings from the selected camera will be displayed on the
screen.
Move the cursor using Direction keys and press ENTER to select an item.
Change the value using UP / DOWN keys.
Press ENTER to confirm the settings or ESC to abort.
Press ESC to return to Record Setup menu.
Please note that the total normal PPS for all channels cannot exceed 240
NTSC (720*240@240PPS) / 200 PAL (720*288@200PPS). To increase one
channel’s PPS, you may have to reduce others’ first. Event PPS is not
restricted to this rule, since a smart event scheduler will handle the total PPS
with a correct weighting.
3.5.5
Record Event Video Only
If the DVR shall start recording only when alarms are triggered, follow the
steps below:
Enter the OSD setup menu with correct password.
In the OSD setup menu, select <Record Setup> menu. Move the cursor to
the item <Preset Config>, and select <Event only>.
Refer to OSD Setup Manual, section
Preset Record Configuration
for more
detailed information.