DVR User’s Manual
30
3.6.7
Event Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds.
3.6.8
Per Channel Config
This menu is used to configure the <Video Loss Detect>,
<
Motion Detect>,
<Alarm In> and <Alarm Out> settings for each channel. The menu is
displayed as below.
Per Channel Config
Channel Select
Video Loss Detect
Motion Detect
Detection Config
Alarm In
Alarm Out
CH01
Off
Off
OFF
ON
3.6.8.1
Channel Select
The item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the selection.
3.6.8.2
Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event.
Select <On> to enable Video Loss alarm events, or <Off> to disable.
3.6.8.3
Motion Detect
This item allows users to enable or disable motion detection function of the
DVR. Select <On> to enable Motion Detect alarm events, or <Off> to disable.
If motion detection function is enabled, it is required to define motion
detection parameters such as detection area and sensitivity settings in
<Detection Config>.