5.5 No DMX signal response
This function is used both to protect the installation against the DMX
signal loss and to obtain control over LEDs without connecting an external
controller. Once it is activated, if there is no DMX signal the module will realize
a desired function independently. Reconnecting the DMX signal will
automatically break the realized function and the module will once again
follow the commands transmitted via the DMX line.
P01
–
P18
– choosing a ready program provided in the device software. For
each program it is possible to set the speed (
SPd
) of the effects reproduction
on range
0,1 – 99,9s
and smoothness of change of steps (
FAd
) in range
0 – 100
, where
0
is a step transition, and
100
completely smooth.
14
ENTER
2 x NEXT
PREV
ENTER
ENTER
NEXT
NEXT
NEXT
ENTER
NEXT
ENTER
ENTER
NEXT
NEXT
NEXT
NEXT
NEXT
