The driver has a built-in
flicker free
frequency control system, which
makes it especially suitable for use in the television industry.
The RGBW LEDs often differ quite substantially in parameters, this can
cause problems in obtaining a white color (at full power especially). Therefore
PX715 comes with a very useful function called "white balance". Thanks to it
you can choose color correction for each set of LEDs controlled by the device
to achieve at full power the color white.
What is more, the driver has been equipped with an output for the
temperature sensor and RDM protocol support. The support of the sensor
allows for power reduction depending on temperature.
2
Safety conditions
PX715 LED Driver 4 x 700mA/48V is a device powered with safe voltage
12 – 48V; however, during its installation and use the following rules must be
strictly observed:
1. The device may only be connected to 12 – 48V DC with current-
carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data.
4. Connection of power supply can only be made with a conductor of
minimum cross-section area of 2,5mm
2
and DMX signal with shielded
conductor.
5
