8
RDM – available parameters
The PX715 supports the DMX-RDM protocol. DMX protocol allows only of
a one-way data transmission, while its extension the RDM protocol can
transmit information in two directions. This makes possible to simultaneously
send and receive information, and hence the possibility of monitoring
activities of the compatible devices. Thanks to RDM some available settings
of compatible devices may be programmed using this protocol.
List of RDM parameters supported by the PX715:
Parameter name
PiD
Description
SUPPORTED_PARAMETERS
0x0050 all supported parameters
PARAMETER_DESCRIPTION 0x0051 description of additional
parameters
DEVICE_INFO
0x0060 information concerning the device
SOFTWARE_VERSION_LABEL 0x00C0 firmware version of the device
DMX_START_ADDRESS * /
DMX_ADDRESS *
0x00F0
DMX starting address of the
device;
Range 1 – 512
IDENTIFY_DEVICE * /
IDENTIFY *
0x1000
device identification;
Two states are possible:
identification is off (0x00 value)
and identification
is on (0x01 value).
STATUS_MESSAGES **
0x0030 information about device status
DEVICE_MODEL_
DESCRIPTION /
DEV_MODEL_DESC
0x0080 device description, e.g. name
31
