5.2 Group DMX address settings
The menu of the PX715 driver allows for setting the DMX address within
a range between 1 and 505 – 511 depending on work mode of device.
For example in RGB mode it occupies three consecutive DMX addresses.
If start address is set to 510, the last channel is occupied by address 512.
To set the DMX address:
1. Set the “
Adr
” function.
2. Use the “
next
” or “
previous
” buttons to set the selected DMX address.
3. Push the “
enter
” button to confirm choose.
5.3 Individual DMX address settings
The PX715 module has an option that allows for changing individual
settings. It enables assigning any DMX address to every output channel.
The simplest example of implementation of this function is to control the
lightness of one-color LEDs connected to all outputs. In such case, the same
address must be assigned to all channels so that all outputs are controlled by
one slider on the control panel.
10
ENTER
NEXT
NEXT
NEXT
ENTER
ENTER
ENTER
ENTER
ENTER
NEXT
