PURSUIT 2460 Denali, Owner'S Manual

Page: 98 / 132

2460 Denali
Chrome Hardware
Use a good chrome cleaner and polish on all chrome hardware.
Acrylic Plastic Glass
Acrylic plastic glass scratches easily. Use a soft cloth and mild soap and water to clean acrylic glass.
Solvents and products containing ammonia can permanently damage acrylic plastic glass. A coat
of automotive or boat wax is beneficial to protect the surface. Do not use the following on acrylic
glass:
Abrasive cleaners Acetone
Solvents Alcohol
Glass cleaners Cleaners containing ammonia
Simulated Wood grain Panels
The simulated wood grain instrument and switch panels are made using a special process. Each
panel is clear coated with a special exterior finish and hand buffed to obtain a rich deep high gloss
wet look. The clear coat is formulated for the marine environment, but basic precautions and regular
care are necessary to protect it.
DON'T:
•
Drill or cut any holes through the clear coat.
• Rub the finish using a lot of pressure.
• Use any solvent of any kind on the finish.
• Use rubbing compound of any kind on the finish.
• Use any cleaners with ammonia or an abrasive on the finish.
• Use any Scotchbrite
TM
type product on the finish.
• Use any powder abrasive such as Ajax
TM
or Soft Scrub
TM
on the finish.
Preventative Care:
Waxing the panels will protect against water spots. The rain water is contaminated and if the panels
are not waxed, water spots will be apparent. Before using your boat and at regular intervals
thereafter, we recommend waxing the panels with one of the following products:
•
Premium marine Polish with Teflon
• Starbrite
®
#85714 for Paste Wax
• Starbrite
®
#85732 for Liquid Wax
Note: Use normal high gloss care products. For best results we recommend Teflon wax
manufactured by Starbrite
®
.
To remove water spots, wipe with mineral spirits and wax using one of the recommended products
mentioned above. Do not use lacquer thinner, acetone or any other solvent on the finish.
13-4