PURSUIT 2460 Denali, Owner'S Manual

Page: 108 / 132

2460 Denali
BEFORE LAUNCHING THE BOAT, MAKE SURE THE DRAIN PLUG IS IN-
STALLED.
Reactivating The Boat After Storage
• Charge and install the batteries.
• Install the drain plug in the hull.
• Check the engines for damage and follow the manufacturer’s instructions for recommissioning.
• Check the engine mounting bolts to make sure they are tight.
• Perform all routine maintenance.
• Check all hose clamps for tightness.
• Pump the antifreeze from the fresh and raw water systems and flush several times with
freshwater. Make sure all antifreeze is flushed from the water heater and it is filled with
freshwater before it is activated.
• Check and lubricate the steering and control systems.
• Clean and wash the boat.
• Install all upholstery, cushions and canvas.
After Launching
• Carefully check all water systems and the engine hoses for leaks. Operate each system one at
a time checking for leaks and proper operation.
• Check the bilge pump manual and automatic switches.
• Check the engine for proper alignment.
• Prime the fuel system and start the engines.
• Carefully monitor the gauges and check for leakage and abnormal noises.
• Operate the boat at slow speeds until the engine temperature stabilizes and all systems are
operating normally.
14-6