PureTools PT-PMS-42S, User Manual

Page: 14 / 68

User Manual
PT-PMS-42S
8
3.2 Matrix Switcher Rear Panel
①
INPUTS: Total four video inputs and one audio input.

1.HDMI: Type-A female HDMI port to connect the HDMI source. One external
balanced audio input (5-pin) can be embedded in the HDMI input.

2.HDMI: Type-A female HDMI port to connect the HDMI source.

3.HDMI: Type-A female HDMI port to connect the HDMI source.

4.USB-C: Type-C USB port to connect the device with SlimPort output, e.g.
MacBook.
②
OUTPUTS:

1.HDMI: Type-A female HDMI port to connect the display device.

2.HDBT: RJ45 port to connect the PT-HDBT-210-RX receiver to transmit AV
signal, IR and RS232 control signal. The HDBT output supports 24V PoC.

2.HDMI: Type-A female HDMI loop output port to connect the display device.
Note: The 2.HDMI and 2.HDBT ports output the same signal.

SPDIF: Toslink connector to connect speaker or amplifier for HDMI OUT
(default) or HDBT OUT audio de-embedding, or it is used for ARC audio output
from PT-HDBT-210-RX receiver.

AUDIO: 5-pin terminal block to connect speaker or amplifier for HDMI OUT
(default) or HDBT OUT audio de-embedding.
③
AUDIO INPUTS:

MIX: 5-pin terminal block to connect the audio source for global audio mixing.

MIC: Microphone audio input for global audio mixing.
Put the Phantom (48V) switch in ON position, the 3-pin terminal block to
connect condenser microphone.
Put the Phantom (48V) switch in
OFF position, the 3-pin terminal block to
connect dynamic microphone.
DC 24V 1.HDMI 2.HDMI 3.HDMI 4.USB-C 1.HDMI
Phantom (48V)
ON OFF
MIC FIRMWARE RS232
Tx Rx
2.HDBT
L R
AUDIO SPDIF IR EYE IR IN IR OUT
OUTPUTS AUDIO INPUTS CONTROL
2.HDMI
L R
MIX
L R
AUDIO
1 2 3
4
5