PureTools PT-PMS-42S, User Manual

Page: 10 / 68

User Manual
PT-PMS-42S
4
Audio Output
Frequency Response 20Hz~20KHz, ±1dB
Max Output Level
SPDIF: ±0.05dBFS.
L+R: 2.0Vrms ± 0.5dB. 2V=16dB headroom above -10dBV (316mV)
nominal consumer line level signal.
THD+N
<0.05% (-80dB), 20Hz~20KHz bandwidth, 1KHz sine at 0dBFS level (or
max level)
SNR
SPDIF: >90dB, 20Hz~20 kHz bandwidth.
L+R: >80dB, 20Hz~20KHz bandwidth.
Crosstalk Isolation
SPDIF: <-70dB, 10KHz sine at 0dBFS level (or max level before clipping).
L+R: <-80dB, 10KHz sine at 0dBFS level (or max level before clipping).
L-R Level Deviation L+R: < 0.05dB, 1KHz sine at 0dBFS level (or max level before clipping)
Frequency Response
Deviation
<±0.5dB 20Hz~20KHz.
Output Load Capability L+R: 1KΩ and higher (Supports 10x paralleled 10KΩ loads).
Stereo Channel Separation >70dB@1KHz.
Noise Level SPDIF: -90dB; L+R: -85dB
Control Part
Control Port
(1) Phantom (48V) Switch, (1) IR IN, (1) IR OUT, (1) IR EYE, (1) FIRMWARE,
(1) RS232, (1) TCP/IP
Control Connector
(1) 2-pin DIP Switch, (3) 3.5mm jacks, (1) Type-A USB, (1) 3-pin terminal
blocks, (1) RJ45
General
Transmission Mode HDBaseT
Transmission Distance
HDBaseT Output:
1080P@60Hz ≤ 230 feet (70 meters),
4K@60Hz ≤ 131 feet (40 meters)
Bandwidth 18Gbps
Operation Temperature -5 ℃ ~ +55 ℃
Storage Temperature -25
℃
~ +70
℃
Relative Humidity 10%-90%