1.5 Uncrating Your Press
Steps to Safely Uncrate Your Press
Note:
Use two people to lift the press safely.
1.
Using a Phillips screwdriver or power tool,
remove wood screws from top lid.
(Figure 1A)
2.
Lift off crate cover.
3.
Remove contents from top section and remove
crate shelf.
(Figure 2A)
4.
Remove the loose foam packing blocks around
the press (some foam blocks are glued to the
crate itself - do not remove them).
5.
Using the two straps around the press pull
straight up to remove the press from the crate
and set on a sturdy table.
(Figure 3A)
6.
Remove the plastic wrapping and set your Dual
Pressure kit as well as your vertical legs aside.
7.
Turn your emergency stop button clockwise to
release.
8.
Turn your Speed Controller knob a few turns
counter clockwise to open the valve. This will
allow the plates to fully actuate.
Figure 1A
Figure 4A
Figure 2A
