2.5 Using Push Connect Fittings
Attaching & Using Push Connect Fittings
Your push connect fittings securely hold your
pneumatic tubing in place.
To Insert:
1.
Simply take your pneumatic tubing and insert it as far into the
fitting as it will sit.
(
Figure 1A)
2.
Verify it is fully connected and seated by gently tugging upward
on the hose. It should not give and will remain secured.
To Remove:
1.
Using your fingers, push down on the grey ring as much as
you are able (it will only move downward a tiny bit).
2.
While pushing down on the grey ring, gently push the
pneumatic hose into the fitting, and then pull outward to
remove. If it is not releasing, push down slightly harder onto the
grey ring to release the tubing.
Figure 1A
