ULTRATWIN (UL)
INSTRUCTION MANUAL
38
There are two means of editing parameters, directly or using the menu
system. Each is now described.
Using the Menu System
The menu system has been designed to make the changing of parameters
very simple. There are two levels of menu:
Main Menu
and
Sub Menu
.
Main Menu
The
main
or
top
menu is common to both points of measurement and
when you first access the
program mode
your
UltraTWIN
will display the
menu
system for
point 1
. To
change
form one point to
point 2
menu
system, press the
hot key
, whilst in any
Main Menu
heading, e.g. Quick
Setup, Application etc. and you will toggle between the two points and their
relevant menu systems.
Sub Menu
Any
sub-menu
and the
parameters
contained in it relating to Point 1
(Transducer 1) is pre-fixed P1, sub-menus and parameters relating to Point 2
(Transducer 2) are pre-fixed P2. Menus and parameters which are common
to both Points (both transducers) are pre-fixed P* e.g., P*104 Measurement
Units.
On the display, there is a line of text that displays the menu system. Pressing
the arrow keys scrolls the display between the top-level menu items, (as
shown below, starting at Quick Setup).
As you press the cursor keys to scroll left and right between these, you can
press ENTER at any time, to select the desired menu heading, and take you
to the sub-menu.
Quick Setup
Application
Relays
Digital
Inputs
Data Logs
mA 2
Output
Display
OCM
P100 = 4 or 5
Compensation
System
Test
Device
Comm
Echo
Process
Volume
P100 = 6
mA 1
Output
Pump
Advance
Stability
