Pulsar MICROFLOW, Instruction Manual, Page: 60 / 65

Page
54
Response 125
0 = Slow
1 = Fast
Slow
Changing this to ‘Fast’ will
automatically calibrate
parameters in the MicroFlow
sensor to track measurements
faster. This is recommended
for Pumped flow. ‘Slow’ is
recommended when there is
natural flow, as
measurements will be tracked
at a slower pace.
Multipoint
Calibration @
0.2 m/s
152 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
0.4 m/s
153 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
0.8 m/s
154 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
1.5 m/s
155
5 - 500
100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
3.0 m/s
156
5 - 500
100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
5.0 m/s
157 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
calibration
mode
158
0 = Off
1 = On
Off
Turns Multipoint calibration
on and off.