Pulsar MICROFLOW, Instruction Manual, Page: 52 / 65

Page
46
Flow Record Tab
The flow record provides a record of the flow over time. Each point on the graph
represents a 1.2 second interval. However when the trace button has been pressed
and a trace is being retrieved from the sensor, this slows down and a point on the
graph now represents a 2 second interval.
You can zoom in by clicking and holding the mouse to draw a box over the region
to zoom in on. Zooming out can be done by right clicking on the chart and selecting
“Undo All Zoom”.
To clear the Flow Record chart, select Setup > Clear Flow Record Chart, while the
chart is inactive.
Important Information
When the save data to file function is being used, flow information
and traces will be written to file, at the fixed interval selected via
‘Setup > Recording Interval’. See ‘
Recording Interval
’ in the
‘
Using MicroFlow PC
’
section of this manual.