Pulsar MICROFLOW, Instruction Manual

Page: 10 / 65

Page
4
Functional Description
Based upon state-of-the-art micro-wave sensing technology, the MicroFlow
integrates Pulsar’s innovative and award winning DSP (Digital Signal Processing)
platform, offering you a cost effective solution with excellent reliability and
performance.
The Pulsar MicroFlow has been designed to provide maintenance free
performance.
The MicroFlow automatically matches to the protocol and Baud rate of the
controller. When it is connected to a controller and powered up, after approx. 20
seconds the sensor will adjust to the Baud rate of the controller it is connected to.
Limitations of use
1. The MicroFlow must be routinely inspected to avoid the build-up of dust
layers when installed in to Zone 21 & Zone 22.
2. Electrostatic hazard – The MicroFlow must only be wiped with a damp or
antistatic cloth.
3. Only leaded little fuses (0242 series) of 100mA should be used with the Ex
mb approved MicroFlow.
4. The outer enclosure is made from Valox357U, consider the performance of
this material with respect to chemicals that may be present in the hazardous
area.
5. The equipment should not be used if there are any cracks/damage to any part
of the enclosure.