Pulsar MICROFLOW, Instruction Manual, Page: 33 / 65

Page 27
•
The sensor can be positioned to obtain readings following the direction of the
flow. Or it can be positioned to measure the oncoming flow as seen below:
Preparation for Operation
Before switching on, ensure that the following is checked:
✓
MicroFlow is mounted correctly and is secure.
✓
All wiring is correct to a Pulsar controller.
✓
The power supply is correctly installed.
General Maintenance
There are no user serviceable parts inside MicroFlow . If you experience any
problems with the unit, then please contact Pulsar Process Measurement for
advice.
To clean the equipment, wipe with a damp cloth. Do not use any solvents on the
enclosure.
MicroFlow obtaining readings
following the direction of the flow.
MicroFlow obtaining readings
from the oncoming direction of the
flow.