Pulsar MICROFLOW, Instruction Manual, Page: 35 / 65

Page 29
The correct PPE should be worn on site when performing maintenance on the
system, if in doubt please contact your site Health and Safety Officer for further
advice.
To remove the sensor, first loosen any glands, couplers etc. that may connect it to
the Mounting Bracket, and then lift the sensor body onto a safe place. Taking care
not to damage the sensor housing or cable whilst performing this removal.
The sensor can then be safely inspected for damage or material fouling and can be
carefully cleaned with a damp cloth to remove any foreign debris.
Important Information
Care should be taken when removing and cleaning so as to not damage
the device.