V. QUALITY CONTROL TESTING, continued
How to Run a Quality Control Test on Electrochemical Test Strips
Refer to the instructions for use provided with your quality control materials.
If Quality Control Results Are Not in Range
IMPORTANT:
Patient tests should not be performed until control results
are within range.
1.
Ensure test strip port area is clean.
2.
Make sure neither the test strips nor the controls are past the expiration
date printed on the label.
3.
Make sure the MEMo Chip matches the test strip lot.
4.
Repeat the test again using fresh materials.
5.
Call Customer Service for assistance.
28
