III. SETUP, continued
How to Turn Off the Analyzer
To turn off the analyzer, press both buttons (Enter and Next) at the same
time for three seconds. After three minutes of idle time (without a test strip or
check strip inserted), the analyzer will perform a 6 second count down and
turn off. To stop shutdown, press either button. You can also remove the
batteries to turn off the analyzer.
Setting Language
The first time the analyzer is turned on, you will be required to set the
language, date, and time. The language menu consists of the following
choices: English (ENGLISH), Spanish (ESPAÑOL), Italian (ITALIANO),
German (DEUTSCH), French (FRANÇAIS), Portuguese (PORTUGUÊS),
Dutch (NEDERLANDS), Chinese (
中文
), and Russian (
РУССКИЙ
).
How to Set the Language (First-Time Use)
1.
Turn on the analyzer by pressing either button (Enter or Next).
2.
The display will read LANGUAGE. Press Enter.
3.
ENGLISH will be displayed. Press Enter if English is desired.
4.
For other languages press Next until the desired language is displayed,
then press Enter. To set the date and time, proceed to the
How to Set
the Date and Time
section.
15
