III. SETUP, continued
How to Set the Wi-Fi On or Off
The CardioChek Plus professional analyzer wireless communication has
been preset to off. To turn the Wi-Fi to on or off, follow the steps listed
below:
1.
If the analyzer is off, press either button to turn on the analyzer. Wait for
the display to read INSTALL MEMO CHIP or INSERT STRIP.
Note:
If RUN TEST is displayed, go to Step 3.
2.
Press Next. The display will read RUN TEST.
3.
Press Next until SETTINGS is displayed.
4.
Press Enter. Wi-Fi is displayed.
5.
Press Enter. The display will highlight
(Wi-Fi on).
6.
Press Enter to select Wi-Fi on or press Next to highlight
7.
Press Enter to accept the Wi-Fi choice highlighted.
8.
Press Next until EXIT is displayed.
9.
Press Enter to return to SETTINGS.
(Wi-Fi off).
10.
Press Next to return to RUN TEST.
Note
:
If unable to run a test, wireless communication and patient ID lock
may be on. You will see a Wi-Fi symbol flashing. To run a test, send a new
patient ID to the analyzer, turn off wireless communication or press and hold
both buttons on your analyzer to override the patient ID lock.
See the
Wi-Fi
Statement
section for additional information regarding wireless compatibility.
20
