III. SETUP, continued
How to Set the Sound
The CardioChek Plus professional analyzer sound has been preset to
on. To turn the sound on or off, follow the steps listed below:
1.
If the analyzer is off, press either button to turn on the analyzer. Wait for
the display to read INSTALL MEMO CHIP or INSERT STRIP.
Note:
If RUN TEST is displayed, go to Step 3.
2.
Press Next. The display will read RUN TEST.
3.
Press Next until SETTINGS is displayed.
4.
Press Enter, then Next until SOUND is displayed.
5.
Press Enter. The display will highlight
(on) .
6.
Press Enter to select sound or press Next to highlight
7.
Press Enter to accept the sound choice highlighted.
8.
Press Next until EXIT is displayed.
9.
Press Enter to return to SETTINGS.
(off).
10.
Press Next to return to RUN TEST.
19
