PTI security systems VP keypad controls entry, Installation And Operation Manual

Page: 6 / 40

3
2
installation
MOUNTING OPTIONS
The VP keypad controls entry to or exit from a secured area. It works in
conjunction with a controller and control software. The VP can be used
to control gate access, building access, room access, elevator access,
etc. It is designed for ease of use and flexibility. Both the keypad and the
large LCD are backlit for easy visibility day and night. Mounting height for
devices will vary with local code regarding handicap access, emergency
and fire access, and other regulations.
Before installing the VP, determine where and how the device will be
installed as the mounting location will be determined by how the device is
to be used. If it is to be used for drive up access, it must be installed where
it can be accessed from a vehicle’s driver door. If it is to be used for walk up
access, it must be installed where it is easily accessible to a person on foot.
Drive Up Accessibility
When the VP will be positioned for drive up accessibility, the device must
be mounted within easy reach of the driver of an automobile or light truck.
Most such applications use gooseneck stands that are located on an island
between the entry and exit gates, or to the left side of the gate if a single
gate is used. Local building codes may set a minimum and maximum
height for devices that are accessible by vehicle. Figure 1 shows possible
mounting locations when used for vehicle access.
Walk Up Accessibility
When the VP is used for walk up access, it can be mounted on a stand
or attached to a wall. It can be surface mounted so that it protrudes from
the wall.
Figure 1