PSV groupe DRC-C10, User Manual

Page: 9 / 32

9

Be sure body is well tighten
B / MOUNTING PLATES AND KNIVES
1/
SYSTEM WITH 3 CUTTING ELEMENTS (UNGER).
NOTE :
Disconnect the machine from the electricity grid for the
following:
Insert the A-helix (2) inside the body (1) with a slight twisting motion for a
good engagement with the hex output shaft engine.
B-Fit the knife plate (3).
C-Mount the blade (4).
D-Mount plate (5).
E-Assemble the ring (6).
F-mount stainless steel nut (7).
VERY IMPORTANT :

It is essential to follow the order of assembly

Do not mount the entire body / propeller and cutting system at
once.