PSV groupe DRC-C10, User Manual

Page: 12 / 32

1
2
maintenance, disassembled, cleaned and disinfected after each half day of
work.
To do so, we recommend to use detergent (like dish soap or ammonia
products).
B/
Preliminary cleaning:
Remove visible dirt by brushing (body, propeller, screw, plates and knives).
C/
DISINFECTION
Immerse all removable parts in a bath of warm water (Temperature 45-55 °
C.) with a detergent-disinfectant appropriate.
For the plate and body wash in warm water with the same detergent-
disinfectant.
D/ FLUSH
Rinse the removable parts, rinse the plate, and the body.
Do not immerse the device. Do not clean the jet pressure
The brushes used must be cleaned in a detergent solution and rinsed.
The body of the chopper does not require special maintenance. Just use a
towel or disposable paper moistened.
Avoid using abrasive cleaners that will damage the steel. Sponges are
prohibited.
E/ MAINTENANCE
The gearbox requires no maintenance.
6/ WARNING
PROTECTION AGAINST THE RISK OF CUTS CAUSED BY KNIVES:
There is a serious risk when the operator can move the fingers through the