PSV groupe DRC-C10, User Manual

Page: 10 / 32

1
0

Installation should be done as described above in several
phases.
2/ PRECAUTIONS FOR INSTALLATION AND MAINTENANCE
SYSTEM UNGER
Make sure that the cutting system is mounted exactly as shown below.
Improper installation, including upside down, causing breakage of the
blades or plates.
The plate must be perfectly knife against the face of the body of the
chopper.
The nut stainless steel machine should not be tightened significantly.
Change the blades before they are flush with the branches of the knife.
To surface plates from wear. Plates prevent waste a perfect fit and cause
rapid wear of the blades.
A - PLATE A-KNIFE
B -DOUBLE FACE KNIFE (shoulder outlet plate side )
C -PLATE WITH HOLES