PSV groupe DRC-C10, User Manual

Page: 13 / 32

1
3
plate of hash, as the knife rotates in contact with it.
When the holes have a diameter less than 4mm, the risk of introduction of
the fingers does not exist (CF NF E 09-010). It is the same for diameters
between 4 and 8mm included, provided that the plate has a thickness of
5mm.
For hole diameters greater than 8mm or specially shaped openings (in
beans for example), it is necessary to develop a device that prevents
access to the dangerous part.
7/ ACCESSORIES
Your device comes with a pestle in food.
8/ AFTER SALES SERVICE
After-sales service is performed by your dealer:
He will ensure the start and the possible restoration of your device and he
will provide spare parts and accessories.
9/ WARRANTY
As a manufacturer, we guarantee our equipment one year against any
manufacturing defect, the bill acting as a warranty.
IMPORTANT:
The electrical and electronic parts are excluded from the warranty.
LIMIT OF OUR GUARANTEE:
The warranty applies only to the purchaser and not to third parties to which
the material could be resold.
Our guarantee is limited to replacement or repair free of parts found
defective by us. In this case, the material is returned to us prepaid.
The port and the workforce are in all cases be borne by our distributor.
All comments and not misuse by special instructions, changes,
modifications, or repairs outside the workshop of an authorized dealer, and
the lack of identification plate, result in the cancellation of the guarantee.