Chapter 6: Settings
Memory
132
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Add Key
Only existing trigger sources are shown in the
Source
combo-box. To add a new
source to this list, tap on the
Add Key
button. A dialog box pops up, allowing you to
select the keyboard key to use as a trigger source.
Trigger Press Type
You can enable either an
Up/Down
or
Double Click
response to a trigger press.
Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger
down” event is sent to the “owner”—that is, the application receiving the trigger
press information—followed by a “trigger up”. If
Double Click
is chosen in this
menu, when the trigger is pressed, released, and then pressed again, a “double-click”
event will occur. If a mapping with the
Up/down
type has also been configured for
the same source, it will only receive the first set of trigger events.
Module To Trigger
This identifies the driver or application receiving the trigger presses.
Show All Modules
By default, inactive owners are not shown. By checking this checkbox, all owners,
both active and inactive, are displayed.
6.20 Memory
This applet allows you to view memory use, storage card memory allocation, and it
allows you to manage opened programs.
