WIL-10060-E-03
Wilden
®
17
Disassembly / Reassembly
Step 2
Using a 3/16" Hex wrench, remove air
valve bolts. Inspect air valve assembly for
wear or damage.
Step 3
Utilizing the 9/16" box wrench, start by
removing the four long carriage bolts that
secure the top and bottom manifolds to the
center section.
Step 4
Remove the top manifold and lift the center
section off the inlet manifold.
Step 5
Remove the discharge valve balls, seats
and O-rings from the discharge manifold
and inspect for nicks, gouges, chemical
attack or abrasive wear. Replace worn
parts with genuine Wilden parts for reliable
performance. PTFE O-rings should be
replaced when reassembled.
Step 6
Inspect the valve seat, valve seat O-ring
and valve ball from intake manifold. Check
for nicks, gouges, chemical attack or
abrasive wear. Replace worn parts with
genuine Wilden parts for reliable
performance. PTFE O-rings should be
replaced when reassembled.
Step 7
With the 3/4" box wrench or by rotating the
diaphragm by hand, remove the diaphragm
assembly.
.
