Step 2
Now select “Tools” from the top menu and select “Board” and set this to
“Arduino Mega 2560”.
Step 3
Select “File” -> “Open” and navigate to your “SPRINTER” folder and select the file
“Sprinter.pde” and select “Open”
Step 4
A new window should now open with various tabs across the top below the main menu.
The 1st tab should read “Sprinter” and the second tab should read “configuration.h”, this is
the tab we need to select and then we can adjust the variables within this tab to modify the
firmware.
10.0 Computer Setup - Reprap Prusa Mendel Build Manual
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012